Sodium carboxymethyl cellulose and polyanionic cellulose are commonly used rubber powder products. In winter, the temperature is low, and the use is slow. A large amount of rubber powder, cellulose, etc. produced by cellulose manufacturers need to be properly stored, and moisture-proof measures should be taken to avoid moisture and clumping.
In order to prevent cellulose and rubber powder from getting damp, manufacturers should choose a warehouse with sunny ventilation. Sunny ventilation is naturally to ensure a constant temperature in the warehouse, while ventilation is to prevent the accumulation of a large amount of moisture in the warehouse, which can cause cellulose and other clumps. Manufacturers of sodium carboxymethyl cellulose and polyanionic cellulose need to regularly open the doors and windows in the warehouse to disperse the humid air. However, it should be noted that in winter, the air is humid in the morning and evening, and the doors and windows should be tightly closed to prevent moisture from entering the warehouse, causing CMC and PAC to become damp.
The sodium carboxymethyl cellulose and polyanionic cellulose stored in the warehouse shall be well protected from moisture. In addition to using plastic bags for packaging, wood or plastic foam board can also be laid on the ground to isolate moisture from the ground and prevent CMC and PAC from moisture. In addition, cellulose manufacturers cannot store liquids such as water sources and corrosive liquids in warehouses that may cause moisture and clumping of products.
